How to replace the MAP sensor in Subaru Legacy?

For 2000 and 2001 without turbo models, first remove the negative battery terminal cable and Idle Air Control (IAC) solenoid valve from the throttle body. Unplug the electrical connector to MAP sensor, remove the mounting screws from the throttle body to free off the sensor. Replace old MAP sensor gasket with new one and put in place new sensors and IAC valve using new gaskets. For 2003 and later models, disconnect the negative battery terminal cable, then unplug electrical connector of MAP sensor. Remove it by taking out mounting screws on throttle body and discard its old O-ring. When installing this component add a new O-ring on it. For 2004 onwards turbocharged models, disconnecting negative battery terminal will do apart from unplugging electrical connector of MAP sensor. After removing this part by unscrewing mountings at throttle body connections, do away with its former O-ring. While fixing back this device provide it with a fresh O-ring as well. For 2005 onwards turbocharged Legacy and Outback models have to first disconnect the negative battery harness then get to know where is situated No1 cylinder intake manifold runner small bracket that has MAP Sensor mounted on it just before it . The electric wire plug connecting to this gadget must be detached together with vacuum hose connected here too for that matter . Loosen holding nut so as to take away sensing element itself . Please check if there is a need for replacement of vacuum tubing beforehand putting everything in reverse order during reinstallation procedure in line with all these steps outlined above.

Genuine Subaru Legacy MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 MAP Sensors found

View related parts
Subaru Legacy Sensor Assembly Press
Part Number: 22627AA510
$245.50 MSRP: $346.75
You Save: $101.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure; M.A.P. Sensor, Map Sensor, Tank Pressure Sensor
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2013-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4, 2.5L H4 DOHC
View related parts
Subaru Legacy Sensor Assembly
Part Number: 22627AA13A
$64.19 MSRP: $89.15
You Save: $24.96 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2001 Subaru Legacy | Base, Brighton, Cold Weather, GT, L, Limited | 2.5L H4
View related parts
Subaru Legacy Sensor Assembly Press
Part Number: 22627AA470
$270.00 MSRP: $381.35
You Save: $111.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Replaces: 22627AA350
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2006-2012 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, Base | 2.5L H4, 2.5L H4 SOHC
View related parts
Subaru Legacy Sensor Assembly-Press
Part Number: 22627AA25A
$110.58 MSRP: $153.58
You Save: $43.00 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure; Pressure Sensor
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005 Subaru Legacy | 2.5i, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Sensor Assembly-Pressure
Part Number: 22627AA130
$296.99 MSRP: $419.48
You Save: $122.49 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Map Sensor
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2001-2004 Subaru Legacy | Flat6, Flat6 L.L.Bean, Flat6-S, SUS Flat6 | 3.0L H6
View related parts
Subaru Legacy Sensor Assembly Press
Part Number: 22627AA19A
$117.12 MSRP: $162.67
You Save: $45.55 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2004 Subaru Legacy | Baja, Baja-B, Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, L, Limited, L-S, SUS Flat6, SUS Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Sensor Assembly-Press
Part Number: 22627AA32A
$85.99 MSRP: $119.43
You Save: $33.44 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure; Pressure Sensor
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, Base, GT, GT Limited, XT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Sensor Assembly Press
Part Number: 22627AA350
$270.00 MSRP: $381.35
You Save: $111.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Replaced by: 22627AA470
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2006-2010 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, Base | 2.5L H4, 2.5L H4 SOHC
View related parts
Subaru Legacy Sensor Assembly-Press
Part Number: 22627AA48A
$63.50 MSRP: $88.20
You Save: $24.70 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure; Tank Pressure Sensor
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2012 Subaru Legacy | 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Limited, 2.5i Premium, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4 SOHC, 2.5L H4 Turbo, 3.6L H6
View related parts
Subaru Legacy Sensor Assembly Pressure
Part Number: 22627AA330
$298.86 MSRP: $422.12
You Save: $123.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Replaces: 22627AA200
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2005 Subaru Legacy | 2.5i, 2.5i Limited, Base, Cold Weather, GT, L, L-S, Limited, SUS Limited | 2.5L H4
View related parts
Subaru Legacy Sensor Assembly Pressure
Part Number: 22627AA14B
$73.21 MSRP: $101.68
You Save: $28.47 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2002 Subaru Legacy | Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, GT, L, Limited, SUS Flat6, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Sensor Assembly Pressure
Part Number: 22627AA200
$298.86 MSRP: $422.12
You Save: $123.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Replaced by: 22627AA330
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2005 Subaru Legacy | 2.5i, 2.5i Limited, Base, Cold Weather, GT, L, Limited, L-S, SUS Limited | 2.5L H4
View related parts
Subaru Legacy Pressure Sensor
Part Number: 22627AA100
$282.40 MSRP: $398.87
You Save: $116.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998 Subaru Legacy | Brighton, L, Post | 2.2L H4 (New EVAPO)
View related parts
Subaru Legacy Sensor Assembly-Press
Part Number: 22627AA220
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2003-2004 Subaru Legacy | Baja, Baja-S, Base, Brighton, Cold Weather, GT, L, Limited, L-S, SUS Limited | 2.5L H4
View related parts
Subaru Legacy Sensor Assembly Pressure
Part Number: 22627AA210
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Replaced by: 22627AA340
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004 Subaru Legacy | Baja-B | 2.5L H4 Turbo
View related parts
Subaru Legacy Pressure Sensor
Part Number: 22627AA06A
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1999 Subaru Legacy | Brighton, L, Post | 2.2L H4 Series
View related parts
Subaru Legacy Pressure Sensor
Part Number: 22627AA10A
Product Specifications
- Other Name: Sensor Assembly-Pressure
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1999 Subaru Legacy | Brighton, GT, L, Out Back, Post, SUS | 2.2L H4 Series, 2.5L H4

Subaru Legacy MAP Sensor

Our website stands as the go-to online destination for OEM Subaru Legacy MAP Sensor. With complete lines of genuine Subaru Legacy MAP Sensor available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy MAP Sensor Parts Questions & Experts Answers

Sensor Assembly-Press
22627AA32A
Q: How to replace the MAP sensor in Subaru Legacy?
A: For 2000 and 2001 without turbo models, first remove the negative battery terminal cable and Idle Air Control (IAC) solenoid valve from the throttle body. Unplug the electrical connector to MAP sensor, remove the mounting screws from the throttle body to free off the sensor. Replace old MAP sensor gasket with new one and put in place new sensors and IAC valve using new gaskets. For 2003 and later models, disconnect the negative battery terminal cable, then unplug electrical connector of MAP sensor. Remove it by taking out mounting screws on throttle body and discard its old O-ring. When installing this component add a new O-ring on it. For 2004 onwards turbocharged models, disconnecting negative battery terminal will do apart from unplugging electrical connector of MAP sensor. After removing this part by unscrewing mountings at throttle body connections, do away with its former O-ring. While fixing back this device provide it with a fresh O-ring as well. For 2005 onwards turbocharged Legacy and Outback models have to first disconnect the negative battery harness then get to know where is situated No1 cylinder intake manifold runner small bracket that has MAP Sensor mounted on it just before it . The electric wire plug connecting to this gadget must be detached together with vacuum hose connected here too for that matter . Loosen holding nut so as to take away sensing element itself . Please check if there is a need for replacement of vacuum tubing beforehand putting everything in reverse order during reinstallation procedure in line with all these steps outlined above.