How to remove and install a hood release cable and Hood Latch on Subaru Impreza?

On 2008 and later models, remove the front bumper cover. Scribe a line around the latch to aid alignment when installing. Detach the latch retaining bolts from the radiator support and remove the latch. Note the routing of the hood release cable, then disengage the cable from the latch assembly. Installation is the reverse of removal. Disconnect the hood release cable from the latch assembly as described above. Attach a piece of stiff wire to the end of the cable. Trace the cable back to the firewall and detach all cable retaining clips. On earlier models, remove the knee bolster. Remove the hood release lever retaining screws. Disengage the cable from the hood release lever. Pull the old cable into the passenger compartment until you can see the stiff wire that you attached to the cable. A grommet insulates the cable hole in the firewall from the elements. The new cable should have a new grommet, so you can remove and discard the old cable grommet. Make sure the new grommet is already on the new cable, then detach the old cable from the wire and attach the new cable to the wire. Working from the engine compartment side of the firewall, pull the wire through the cable hole in the firewall. Installation is otherwise the reverse of the removal. Working in the passenger compartment, push the grommet into place with your fingers. Make sure it's fully seated in the hole in the firewall.

Genuine Subaru Impreza Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hood Release Cables found

View related parts
Subaru Impreza Hood Cable Assembly
Part Number: 57330FA100ML
$26.51 MSRP: $38.42
You Save: $11.91 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable-Front Hood; Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1994-2007 Subaru Impreza | 25i, Base, Brighton, L, LE, LS, LX, Outback, Outback Sport, RS, STI, STI Limited, TS, WRX, WRX TR | 1.8L H4, 2.0L H4 Turbo, 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo
View related parts
Subaru Impreza Cable Front Hood
Part Number: 57330FG080
$16.01 MSRP: $23.20
You Save: $7.19 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable-Front Hood; Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2016 Subaru Impreza | 2.5 GT, 2.5i, Base, Limited, Outback Sport, Premium, Sport, Sport Limited, STI, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Cable Assembly Front Hd SIA
Part Number: 57330FL00A
$15.53 MSRP: $22.50
You Save: $6.97 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable-Front Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2017-2018 Subaru Impreza | Base, Limited, Premium, Sport
View related parts
Subaru Impreza PT931293 Hood Cable Assembly
Part Number: 57330FA100MJ
Product Specifications
- Other Name: Cable-Front Hood; Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1994 Subaru Impreza | Base, L, L+, LE, LS | 1.8L H4
View related parts
Subaru Impreza PT931293 Hood Cable Assembly
Part Number: 57330FA100EM
Product Specifications
- Other Name: Cable-Front Hood; Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1994 Subaru Impreza | Base, L, L+, LE, LS | 1.8L H4

Subaru Impreza Hood Release Cable

Our website stands as the go-to online destination for OEM Subaru Impreza Hood Release Cable. With complete lines of genuine Subaru Impreza Hood Release Cable available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Impreza Hood Release Cable Parts Questions & Experts Answers

Cable Front Hood
57330FG080
Q: How to remove and install a hood release cable and Hood Latch on Subaru Impreza?
A: On 2008 and later models, remove the front Bumper cover. Scribe a line around the latch to aid alignment when installing. Detach the latch retaining bolts from the radiator support and remove the latch. Note the routing of the hood release cable, then disengage the cable from the latch assembly. Installation is the reverse of removal. Disconnect the hood release cable from the latch assembly as described above. Attach a piece of stiff wire to the end of the cable. Trace the cable back to the firewall and detach all cable retaining clips. On earlier models, remove the knee bolster. Remove the hood release lever retaining screws. Disengage the cable from the hood release lever. Pull the old cable into the passenger compartment until you can see the stiff wire that you attached to the cable. A grommet insulates the cable hole in the firewall from the elements. The new cable should have a new grommet, so you can remove and discard the old cable grommet. Make sure the new grommet is already on the new cable, then detach the old cable from the wire and attach the new cable to the wire. Working from the engine compartment side of the firewall, pull the wire through the cable hole in the firewall. Installation is otherwise the reverse of the removal. Working in the passenger compartment, push the grommet into place with your fingers. Make sure it's fully seated in the hole in the firewall.