How to remove and install a hood release cable and Hood Latch on Subaru Impreza?

On 2008 and later models, remove the front bumper cover. Scribe a line around the latch to aid alignment when installing. Detach the latch retaining bolts from the radiator support and remove the latch. Note the routing of the hood release cable, then disengage the cable from the latch assembly. Installation is the reverse of removal. Disconnect the hood release cable from the latch assembly as described above. Attach a piece of stiff wire to the end of the cable. Trace the cable back to the firewall and detach all cable retaining clips. On earlier models, remove the knee bolster. Remove the hood release lever retaining screws. Disengage the cable from the hood release lever. Pull the old cable into the passenger compartment until you can see the stiff wire that you attached to the cable. A grommet insulates the cable hole in the firewall from the elements. The new cable should have a new grommet, so you can remove and discard the old cable grommet. Make sure the new grommet is already on the new cable, then detach the old cable from the wire and attach the new cable to the wire. Working from the engine compartment side of the firewall, pull the wire through the cable hole in the firewall. Installation is otherwise the reverse of the removal. Working in the passenger compartment, push the grommet into place with your fingers. Make sure it's fully seated in the hole in the firewall.

Genuine Subaru Impreza Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Hood Latches found

View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FG010
$36.65 MSRP: $50.90
You Save: $14.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood
- Position: Front
- Replaced by: 57310FG011
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2011 Subaru Impreza | 2.5 GT, 2.5i, Outback Sport, STI, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FJ010
$33.34 MSRP: $46.30
You Save: $12.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2012-2016 Subaru Impreza | Base, Limited, Premium, Sport, Sport Limited
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FE080
$41.62 MSRP: $57.80
You Save: $16.18 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy Front Hood Lhd ; Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2006-2007 Subaru Impreza | 25i, Outback, Outback Sport, STI, STI Limited, WRX, WRX TR | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FE011
$40.34 MSRP: $56.03
You Save: $15.69 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy Front Hood Lh ; Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Replaces: 57310FE010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2003 Subaru Impreza | Outback, RS, TS, WRX | 2.0L H4 Turbo, 2.5L H4
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FE030
$40.34 MSRP: $56.03
You Save: $15.69 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2005 Subaru Impreza | Outback, RS, STI, TS, WRX | 2.0L H4 Turbo, 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FG011
$36.65 MSRP: $50.90
You Save: $14.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy Front Hood Lhd ; Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Replaces: 57310FG010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2011 Subaru Impreza | 2.5 GT, 2.5i, Outback Sport, STI, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FL00A
$30.26 MSRP: $42.03
You Save: $11.77 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly Front Hood Sia ; Lock Assembly-Front Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2017-2018 Subaru Impreza | Base, Limited, Premium, Sport
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FE010
$40.34 MSRP: $56.03
You Save: $15.69 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood
- Position: Front
- Replaced by: 57310FE011
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2003 Subaru Impreza | Outback, RS, TS, WRX | 2.0L H4 Turbo, 2.5L H4
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FL12A
$85.86 MSRP: $119.25
You Save: $33.39 (28%)
ADD TO CART
Product Specifications
- Other Name: Lock Assy Front Hood Lhd
- Position: Front
- Replaced by: 57310FL16A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2019-2021 Subaru Impreza | Base, Limited, Premium, Sport
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FA130
$48.54 MSRP: $67.42
You Save: $18.88 (28%)
Product Specifications
- Other Name: Lock Assembly-Front Hood; Latch, Lock
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1997-2001 Subaru Impreza | Brighton, L, Outback, RS, TS | 1.8L H4, 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Impreza Front Hood Lock Assembly
Part Number: 57310FA110
Product Specifications
- Other Name: Latch Assy Hood Lh ; Lock Assembly-Front Hood; Latch, Lock
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1996 Subaru Impreza | Base, Brighton, L, L+, LE, LS, LX, Outback | 1.8L H4, 2.2L H4

Subaru Impreza Hood Latch

Our website stands as the go-to online destination for OEM Subaru Impreza Hood Latch. With complete lines of genuine Subaru Impreza Hood Latch available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Impreza Hood Latch Parts Questions & Experts Answers

Front Hood Lock Assembly
57310FG010
Q: How to remove and install a hood release cable and Hood Latch on Subaru Impreza?
A: On 2008 and later models, remove the front Bumper cover. Scribe a line around the latch to aid alignment when installing. Detach the latch retaining bolts from the radiator support and remove the latch. Note the routing of the hood release cable, then disengage the cable from the latch assembly. Installation is the reverse of removal. Disconnect the hood release cable from the latch assembly as described above. Attach a piece of stiff wire to the end of the cable. Trace the cable back to the firewall and detach all cable retaining clips. On earlier models, remove the knee bolster. Remove the hood release lever retaining screws. Disengage the cable from the hood release lever. Pull the old cable into the passenger compartment until you can see the stiff wire that you attached to the cable. A grommet insulates the cable hole in the firewall from the elements. The new cable should have a new grommet, so you can remove and discard the old cable grommet. Make sure the new grommet is already on the new cable, then detach the old cable from the wire and attach the new cable to the wire. Working from the engine compartment side of the firewall, pull the wire through the cable hole in the firewall. Installation is otherwise the reverse of the removal. Working in the passenger compartment, push the grommet into place with your fingers. Make sure it's fully seated in the hole in the firewall.