How to Remove and Replace the Release Bearing on a Subaru Outback?

Remove the transaxle and release bearing from the input shaft. Pry the release lever from the ball stud and remove the lever and rubber sealing boot (5-speed models). Remove the plug and release lever shaft (6-speed models). Rotate the outer portion of the bearing while applying pressure. Replace any deformed or weak retaining clips or springs. Apply grease to the sleeve of the input shaft bearing retainer, input shaft splines, and release lever contact surfaces. Install the release bearing and secure with retaining clips (5-speed models). Insert the fork from the top until the bearing and lever tabs lock in place. Slide the release lever cross shaft into the case, aligning the slot with the roll pin. Install the cross shaft plug and tighten to the torque (6-speed models). Reinstall the transaxle.

Genuine Subaru Outback Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Release Bearings found

View related parts
Subaru Outback Clutch Release Bearing
Part Number: 30502AA051
$50.76 MSRP: $70.50
You Save: $19.74 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release; Bearing, Release Bearing
- Replaced by: 30502AA150
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-2017 Subaru Outback | 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, Baja, Baja-S, Base, Brighton, Cold Weather, GT, L, Limited, L-S, Out Back | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Outback Clutch Release Bearing
Part Number: 30502AA120
$42.66 MSRP: $59.25
You Save: $16.59 (28%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release; Bearing, Release Bearing
- Replaced by: 30502AA121
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2012 Subaru Outback | 2.5GT Limited, 2.5GT Premium, GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Outback Clutch Release Bearing
Part Number: 30502AA150
$50.76 MSRP: $70.50
You Save: $19.74 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release
- Replaces: 30502AA051
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-2017 Subaru Outback | 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, Baja, Baja-S, Base, Brighton, Cold Weather, GT, L, L-S, Limited, Out Back | 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Outback Clutch Release Bearing
Part Number: 30502AA080
$109.26 MSRP: $151.75
You Save: $42.49 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release
- Replaced by: 30502AA130
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004 Subaru Outback | Baja-B | 2.5L H4 Turbo
View related parts
Subaru Outback Clutch Release Bearing
Part Number: 30502AA130
$109.26 MSRP: $151.75
You Save: $42.49 (28%)
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release; Bearing, Release Bearing
- Replaces: 30502AA080
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2007-2009 Subaru Outback | GT | 2.5L H4 Turbo
- 2004 Subaru Outback | Baja-B | 2.5L H4 Turbo

Subaru Outback Release Bearing

Our website stands as the go-to online destination for OEM Subaru Outback Release Bearing. With complete lines of genuine Subaru Outback Release Bearing available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Outback Release Bearing Parts Questions & Experts Answers

Clutch Release Bearing
30502AA080
Q: How to Remove and Replace the Release Bearing on a Subaru Outback?
A: Remove the transaxle and release bearing from the input shaft. Pry the release lever from the ball stud and remove the lever and rubber sealing boot (5-speed models). Remove the plug and release lever shaft (6-speed models). Rotate the outer portion of the bearing while applying pressure. Replace any deformed or weak retaining clips or springs. Apply grease to the sleeve of the input shaft bearing retainer, input shaft splines, and release lever contact surfaces. Install the release bearing and secure with retaining clips (5-speed models). Insert the fork from the top until the bearing and lever tabs lock in place. Slide the release lever cross shaft into the case, aligning the slot with the roll pin. Install the cross shaft plug and tighten to the torque (6-speed models). Reinstall the transaxle.