How to remove and replace the ignition switch and key lock cylinder on Subaru Outback?

Disconnect the cable from the negative terminal of the battery. Remove the instrument panel lower cover, the upper and lower steering column covers, and the instrument cluster trim panel. Depress the release tab on the ignition switch electrical connector and pull the two halves apart. Make sure to disconnect the ignition switch electrical connector by tracing the wires from the ignition switch down to the connector. If equipped, remove the plate underneath the steering column assembly. On models with a tilt steering column, move the tilt lever down far enough to clear the ignition switch. If you're just replacing the ignition switch, remove the switch retaining screw and remove the switch. Otherwise, leave it in place to be removed as an assembly with the Ignition Lock Cylinder. If you're replacing the Ignition Lock Cylinder, use a hammer and punch to unscrew the two breakaway bolts. Knock these breakaway bolts in a counterclockwise direction to unscrew them, remove the upper clamp and detach the Ignition Lock Cylinder/ignition switch assembly from the steering column assembly by pulling it straight down. If the bolts can't be unscrewed using this method, you'll have to drill a hole down the center of each bolt and unscrew them with a screw extractor or use a larger drill bit and drill out the entire bolt head. Remove the ignition switch and Ignition Lock Cylinder as an assembly. If you're replacing the Ignition Lock Cylinder, remove the ignition switch from the Ignition Lock Cylinder assembly. Installation is the reverse of removal. When installing the lock cylinder bolts, tighten them until their heads twist off.

Genuine Subaru Outback Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Ignition Switches found

View related parts
Subaru Outback Ignition Switch Assembly
Part Number: 83131AG000
$40.16 MSRP: $58.20
You Save: $18.04 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2007 Subaru Outback | 2.5i, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Outback Ignition Switch Set
Part Number: 83139FC001
$48.92 MSRP: $70.90
You Save: $21.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Outback | Baja, Baja-B, Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, L, Limited, L-S, SUS Flat6, SUS Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Outback Ignition Switch Assembly
Part Number: 83131KG000
$42.98 MSRP: $62.28
You Save: $19.30 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2014 Subaru Outback | 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.0R, 3.0R Limited, 3.0R LL-Bean, 3.6R, 3.6R Limited, 3.6R Premium, Base, GT, GT Limited, XT Limited | 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo, 3.0L H6, 3.6L H6
View related parts
Subaru Outback Ignition Sw&St Lock Assembly
Part Number: 83191AG09A
$212.38 MSRP: $310.50
You Save: $98.12 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Manufacturer Note: FOR IMMOBILIZER
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2007 Subaru Outback | 2.5i, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Outback Steering Lock Frame
Part Number: 83133AL01A
$66.17 MSRP: $95.90
You Save: $29.73 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2021 Subaru Outback | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4, 2.5L H4 DI, 3.6L H6
View related parts
Subaru Outback Ignition Sw&St Lock Assembly
Part Number: 83191AG06A
$127.94 MSRP: $185.42
You Save: $57.48 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005 Subaru Outback | 2.5i, 2.5i Limited | 2.5L H4
View related parts
Subaru Outback Switch Ignition
Part Number: 83131AL00A
$20.34 MSRP: $29.48
You Save: $9.14 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Switch Assembly; Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2021 Subaru Outback | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4, 2.5L H4 DI, 3.6L H6
View related parts
Subaru Outback Ignition Steering Lk Assembly IMA
Part Number: 83191AJ03A
$251.27 MSRP: $367.35
You Save: $116.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Outback | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4 DOHC, 2.5L H4 SOHC, 3.6L H6
View related parts
Subaru Outback Steering Lock Frame
Part Number: 83133AL00A
$59.49 MSRP: $86.22
You Save: $26.73 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Lock, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2017 Subaru Outback | 2.5i, 2.5i Premium | 2.5L H4
View related parts
Subaru Outback Ignition STARTER/STEERING Lock
Part Number: 83121AC120
$105.58 MSRP: $153.02
You Save: $47.44 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Steering Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-1997 Subaru Outback | Brighton, GT, L, Out Back | 2.2L H4 , 2.2L H4 (New EVAPO), 2.5L H4
View related parts
Subaru Outback Ignition Sw&St Lock Assembly Lm
Part Number: 83191AE03A
$118.22 MSRP: $171.33
You Save: $53.11 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2004 Subaru Outback | Baja, Baja-B, Base, Cold Weather, GT, Limited | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Outback Ignition Sw&St Lock Assembly
Part Number: 83191AG23A
$203.38 MSRP: $297.33
You Save: $93.95 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2009 Subaru Outback | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, Base, GT Limited, XT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Outback Ignition Sw&St Lock Assembly
Part Number: 83191AG22A
$203.51 MSRP: $297.53
You Save: $94.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2009 Subaru Outback | 2.5i, 2.5i Base, 2.5i Limited, Base, GT, GT Limited, XT Limited | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Outback Ignition Steering Lk Assembly IMA
Part Number: 83191AJ030
$256.93 MSRP: $375.63
You Save: $118.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2013 Subaru Outback | 2.5i Limited, 3.6R Limited | 2.5L H4 DOHC, 2.5L H4 SOHC, 3.6L H6
View related parts
Subaru Outback Ignition Sw&St Lock AYUAT
Part Number: 83191AE02B
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Replaces: 83191AE02A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Outback | Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, GT, L, L-S, Limited, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Outback Ignition Sw&St Lock AYILA
Part Number: 83191AE04A
Product Specifications
- Other Name: Ignition Steering Lock Assembly
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2004 Subaru Outback | Baja, Baja-B, Base, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, Limited, SUS Flat6, SUS Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Outback Ignition Sw&St Lock AYUMT
Part Number: 83191AE01B
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Replaces: 83191AE01A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Outback | Baja-S, Base, Brighton, Cold Weather, GT, L, L-S, Limited | 2.5L H4
View related parts
Subaru Outback Ignition SWITCH/ST Lock Assembly
Part Number: 83191AE01A
Product Specifications
- Other Name: Ignition Steering Lock Assembly
- Replaced by: 83191AE01B
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000 Subaru Outback | Base, Brighton, Cold Weather, GT, L, Limited | 2.5L H4
View related parts
Subaru Outback Ignition Steering Lk Assembly IMM
Part Number: 83191AJ02A
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Outback | 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Premium | 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo
View related parts
Subaru Outback Ignition Steering Lock Assembly
Part Number: 83191AE02A
Product Specifications
- Replaced by: 83191AE02B
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000 Subaru Outback | Base, Brighton, Cold Weather, GT, L, Limited, SUS Limited | 2.5L H4

| Page 1 of 2 |Next >

1-20 of 26 Results

Subaru Outback Ignition Switch

Our website stands as the go-to online destination for OEM Subaru Outback Ignition Switch. With complete lines of genuine Subaru Outback Ignition Switch available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Outback Ignition Switch Parts Questions & Experts Answers

Switch Ignition
83131AL00A
Q: How to remove and replace the ignition switch and key lock cylinder on Subaru Outback?
A: Disconnect the cable from the negative terminal of the battery. Remove the instrument panel lower cover, the upper and lower steering column covers, and the instrument cluster trim panel. Depress the release tab on the ignition switch electrical connector and pull the two halves apart. Make sure to disconnect the ignition switch electrical connector by tracing the wires from the ignition switch down to the connector. If equipped, remove the plate underneath the steering column assembly. On models with a tilt steering column, move the tilt lever down far enough to clear the ignition switch. If you're just replacing the ignition switch, remove the switch retaining screw and remove the switch. Otherwise, leave it in place to be removed as an assembly with the Ignition Lock Cylinder. If you're replacing the Ignition Lock Cylinder, use a hammer and punch to unscrew the two breakaway bolts. Knock these breakaway bolts in a counterclockwise direction to unscrew them, remove the upper clamp and detach the Ignition Lock Cylinder/ignition switch assembly from the steering column assembly by pulling it straight down. If the bolts can't be unscrewed using this method, you'll have to drill a hole down the center of each bolt and unscrew them with a screw extractor or use a larger drill bit and drill out the entire bolt head. Remove the ignition switch and Ignition Lock Cylinder as an assembly. If you're replacing the Ignition Lock Cylinder, remove the ignition switch from the Ignition Lock Cylinder assembly. Installation is the reverse of removal. When installing the lock cylinder bolts, tighten them until their heads twist off.