How to remove and replace the ignition switch and key lock cylinder on Subaru Legacy?

Disconnect the cable from the negative terminal of the battery. Remove the instrument panel lower cover, the upper and lower steering column covers, and the instrument cluster trim panel. Disconnect the ignition switch electrical connector by depressing the release tab and pulling the two halves apart, ensuring the correct connector is unplugged. If equipped, remove the plate underneath the steering column assembly by taking out the fasteners and the ignition switch retaining screw, then pull the switch out of the Ignition Lock Cylinder housing. For models with a tilt steering column, move the tilt lever down far enough to clear the ignition switch. If replacing the ignition switch, remove the switch retaining screw and take out the switch; if not replacing it, removal is unnecessary for Ignition Lock Cylinder access. To replace the Ignition Lock Cylinder, use a hammer and punch to unscrew the two breakaway bolts by knocking them counterclockwise, then remove the upper clamp and detach the Ignition Lock Cylinder/ignition switch assembly from the steering column by pulling it straight down. If the bolts cannot be unscrewed, drill a hole in the center of each bolt and use a screw extractor, or drill out the entire bolt head with a larger bit. Remove the ignition switch and Ignition Lock Cylinder assembly, and if replacing the Ignition Lock Cylinder, take the ignition switch out of the assembly. Installation follows the reverse order of removal, tightening the lock cylinder bolts until their heads twist off.

Genuine Subaru Legacy Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

29 Ignition Switches found

View related parts
Subaru Legacy Ignition Switch Assembly
Part Number: 83131AG000
$41.90 MSRP: $58.20
You Save: $16.30 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2007 Subaru Legacy | 2.5i, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Ignition Switch Set
Part Number: 83139FC001
$51.05 MSRP: $70.90
You Save: $19.85 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Legacy | Baja, Baja-B, Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, L, Limited, L-S, SUS Flat6, SUS Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Ignition Switch Assembly
Part Number: 83131KG000
$44.84 MSRP: $62.28
You Save: $17.44 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2014 Subaru Legacy | 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.0R, 3.0R Limited, 3.0R LL-Bean, 3.6R, 3.6R Limited, 3.6R Premium, Base, GT, GT Limited, XT Limited | 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo, 3.0L H6, 3.6L H6
View related parts
Subaru Legacy Ignition Switch
Part Number: 83131GA060
$46.70 MSRP: $64.87
You Save: $18.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Switch Assembly
- Replaces: 83131AA000
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1997 Subaru Legacy | Base, Brighton, GT, L, LS, LS-D, LS-I, Out Back, Post, SUS, Turbo | 2.2L H4, 2.2L H4 (New EVAPO), 2.5L H4
View related parts
Subaru Legacy Ignition Sw&St Lock Assembly
Part Number: 83191AG09A
$219.83 MSRP: $310.50
You Save: $90.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Manufacturer Note: FOR IMMOBILIZER
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2007 Subaru Legacy | 2.5i, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Steering Lock Frame
Part Number: 83133AL01A
$69.05 MSRP: $95.90
You Save: $26.85 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2021 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4, 2.5L H4 DI, 3.6L H6
View related parts
Subaru Legacy Ignition Sw&St Lock Assembly
Part Number: 83191AG06A
$133.50 MSRP: $185.42
You Save: $51.92 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005 Subaru Legacy | 2.5i, 2.5i Limited | 2.5L H4
View related parts
Subaru Legacy Ignition Steering Lk Assembly IMA
Part Number: 83191AJ03A
$260.08 MSRP: $367.35
You Save: $107.27 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4 DOHC, 2.5L H4 SOHC, 3.6L H6
View related parts
Subaru Legacy Steering Lock Frame
Part Number: 83133AL00A
$62.08 MSRP: $86.22
You Save: $24.14 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Lock, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2017 Subaru Legacy | 2.5i, 2.5i Premium | 2.5L H4
View related parts
Subaru Legacy Ignition STARTER/STEERING Lock
Part Number: 83121AC120
$110.17 MSRP: $153.02
You Save: $42.85 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Steering Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1997 Subaru Legacy | Base, Brighton, GT, L, Out Back | 2.2L H4 , 2.2L H4 (New EVAPO), 2.5L H4
View related parts
Subaru Legacy Ignition Sw&St Lock Assembly Lm
Part Number: 83191AE03A
$123.36 MSRP: $171.33
You Save: $47.97 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2004 Subaru Legacy | Baja, Baja-B, Base, Cold Weather, GT, Limited | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Legacy Ignition Sw&St Lock Assembly
Part Number: 83191AG23A
$212.30 MSRP: $297.33
You Save: $85.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, Base, GT Limited, XT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Ignition Sw&St Lock Assembly
Part Number: 83191AG22A
$212.44 MSRP: $297.53
You Save: $85.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, Base, GT, GT Limited, XT Limited | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Legacy Ignition Sw&St Lock AYUAT
Part Number: 83191AE02B
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Replaces: 83191AE02A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Legacy | Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, GT, L, L-S, Limited, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Ignition Sw&St Lock AYILA
Part Number: 83191AE04A
Product Specifications
- Other Name: Ignition Steering Lock Assembly
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2004 Subaru Legacy | Baja, Baja-B, Base, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, Limited, SUS Flat6, SUS Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Ignition Sw&St Lock AYUMT
Part Number: 83191AE01B
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Replaces: 83191AE01A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Legacy | Baja-S, Base, Brighton, Cold Weather, GT, L, L-S, Limited | 2.5L H4
View related parts
Subaru Legacy Ignition SWITCH/ST Lock Assembly
Part Number: 83191AE01A
$68.60 MSRP: $95.28
You Save: $26.68 (28%)
Product Specifications
- Other Name: Ignition Steering Lock Assembly
- Replaced by: 83191AE01B
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000 Subaru Legacy | Base, Brighton, Cold Weather, GT, L, Limited | 2.5L H4
View related parts
Subaru Legacy Ignition Steering Lk Assembly IMM
Part Number: 83191AJ02A
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Assembly, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Legacy | 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Premium | 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo
View related parts
Subaru Legacy Ignition Steering Lock Assembly
Part Number: 83191AE02A
Product Specifications
- Replaced by: 83191AE02B
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000 Subaru Legacy | Base, Brighton, Cold Weather, GT, L, Limited, SUS Limited | 2.5L H4
View related parts
Subaru Legacy Ignition STARTER/STEERING Lock
Part Number: 83121AA070
Product Specifications
- Other Name: Ignition Steering Lock Assembly; Ignition Lock, Ignition Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1994 Subaru Legacy | Base, L, LS, LS-D, Turbo

| Page 1 of 2 |Next >

1-20 of 29 Results

Subaru Legacy Ignition Switch

Our website stands as the go-to online destination for OEM Subaru Legacy Ignition Switch. With complete lines of genuine Subaru Legacy Ignition Switch available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy Ignition Switch Parts Questions & Experts Answers

Ignition Switch Assembly
83131AG000
Q: How to remove and replace the ignition switch and key lock cylinder on Subaru Legacy?
A: Disconnect the cable from the negative terminal of the battery. Remove the instrument panel lower cover, the upper and lower steering column covers, and the instrument cluster trim panel. Disconnect the ignition switch electrical connector by depressing the release tab and pulling the two halves apart, ensuring the correct connector is unplugged. If equipped, remove the plate underneath the steering column assembly by taking out the fasteners and the ignition switch retaining screw, then pull the switch out of the Ignition Lock Cylinder housing. For models with a tilt steering column, move the tilt lever down far enough to clear the ignition switch. If replacing the ignition switch, remove the switch retaining screw and take out the switch; if not replacing it, removal is unnecessary for Ignition Lock Cylinder access. To replace the Ignition Lock Cylinder, use a hammer and punch to unscrew the two breakaway bolts by knocking them counterclockwise, then remove the upper clamp and detach the Ignition Lock Cylinder/ignition switch assembly from the steering column by pulling it straight down. If the bolts cannot be unscrewed, drill a hole in the center of each bolt and use a screw extractor, or drill out the entire bolt head with a larger bit. Remove the ignition switch and Ignition Lock Cylinder assembly, and if replacing the Ignition Lock Cylinder, take the ignition switch out of the assembly. Installation follows the reverse order of removal, tightening the lock cylinder bolts until their heads twist off.