How Do You Remove and Install Clutch Disc,Clutch Fork,Pressure Plate and Release Bearing on Subaru Impreza?

To remove the clutch, the transaxle must be detached and the engine supported. Use a clutch alignment tool to support the clutch disc during removal. Inspect the flywheel and pressure plate for indexing marks and loosen the pressure plate-to-flywheel bolts. During installation, clean the flywheel and pressure plate surfaces, position the clutch disc and pressure plate against the flywheel, and secure with an alignment tool. Tighten the pressure plate-to-flywheel bolts in a crisscross pattern, lubricate, and install the release bearing. Finally, reinstall the transaxle and all components.

How to Remove and Replace the Release Bearing on a Subaru Impreza?

Remove the transaxle and release bearing from the input shaft. Pry the release lever from the ball stud and remove the lever and rubber sealing boot (5-speed models). Remove the plug and release lever shaft (6-speed models). Rotate the outer portion of the bearing while applying pressure. Replace any deformed or weak retaining clips or springs. Apply grease to the sleeve of the input shaft bearing retainer, input shaft splines, and release lever contact surfaces. Install the release bearing and secure with retaining clips (5-speed models). Insert the fork from the top until the bearing and lever tabs lock in place. Slide the release lever cross shaft into the case, aligning the slot with the roll pin. Install the cross shaft plug and tighten to the torque (6-speed models). Reinstall the transaxle.

Genuine Subaru Impreza Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Release Bearings found

View related parts
Subaru Impreza Clutch Release Bearing
Part Number: 30502AA051
$48.65 MSRP: $70.50
You Save: $21.85 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release; Bearing, Release Bearing
- Replaced by: 30502AA150
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-2017 Subaru Impreza | 2.5i, 25i, Base, Brighton, L, L+, LE, Limited, LS, LX, Outback, Outback Sport, Premium, RS, Sport, Sport Limited, TS | 1.8L H4, 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Impreza Clutch Release Bearing
Part Number: 30502AA120
$40.88 MSRP: $59.25
You Save: $18.37 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release; Bearing, Release Bearing
- Replaced by: 30502AA121
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2006-2011 Subaru Impreza | WRX, WRX Sport, WRX TR, WRXSS | 2.5L H4 Turbo
View related parts
Subaru Impreza Clutch Release Bearing
Part Number: 30502AA150
$48.65 MSRP: $70.50
You Save: $21.85 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release
- Replaces: 30502AA051
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-2021 Subaru Impreza | 2.5i, 25i, Base, Brighton, L, L+, LE, LS, LX, Limited, Outback, Outback Sport, Premium, RS, Sport, Sport Limited, TS | 1.8L H4, 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Impreza Clutch Release Bearing
Part Number: 30502AA080
$104.71 MSRP: $151.75
You Save: $47.04 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release
- Replaced by: 30502AA130
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2005 Subaru Impreza | WRX | 2.0L H4 Turbo
View related parts
Subaru Impreza Clutch Release Bearing
Part Number: 30502AA130
$104.71 MSRP: $151.75
You Save: $47.04 (31%)
ADD TO CART
Product Specifications
- Other Name: Bearing-Clutch Release; Bearing, Release Bearing
- Replaces: 30502AA080
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2011 Subaru Impreza | STI, STI Limited, STI Special Edition, STI Sport, WRX | 2.0L H4 Turbo, 2.5L H4 Turbo
View related parts
Subaru Impreza Clutch Release Bearing
Part Number: 30502AA031
Product Specifications
- Other Name: Bearing-Clutch Release
- Replaced by: 30502AA090
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993 Subaru Impreza | Base, L, L+, LS | 1.8L H4
View related parts
Subaru Impreza Clutch Release Bearing
Part Number: 30502AA090
Product Specifications
- Other Name: Bearing-Clutch Release; Release Bearing
- Replaces: 30502AA031
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1994 Subaru Impreza | Base, L, L+, LE, LS | 1.8L H4

Subaru Impreza Release Bearing

Our website stands as the go-to online destination for OEM Subaru Impreza Release Bearing. With complete lines of genuine Subaru Impreza Release Bearing available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Impreza Release Bearing Parts Questions & Experts Answers

Clutch Release Bearing
30502AA080
Q: How Do You Remove and Install Clutch Disc,Clutch Fork,Pressure Plate and Release Bearing on Subaru Impreza?
A: To remove the clutch, the transaxle must be detached and the engine supported. Use a clutch alignment tool to support the clutch disc during removal. Inspect the flywheel and pressure plate for indexing marks and loosen the pressure plate-to-flywheel bolts. During installation, clean the flywheel and pressure plate surfaces, position the clutch disc and pressure plate against the flywheel, and secure with an alignment tool. Tighten the pressure plate-to-flywheel bolts in a crisscross pattern, lubricate, and install the release bearing. Finally, reinstall the transaxle and all components.
Clutch Release Bearing
30502AA051
Q: How to Remove and Replace the Release Bearing on a Subaru Impreza?
A: Remove the transaxle and release bearing from the input shaft. Pry the release lever from the ball stud and remove the lever and rubber sealing boot (5-speed models). Remove the plug and release lever shaft (6-speed models). Rotate the outer portion of the bearing while applying pressure. Replace any deformed or weak retaining clips or springs. Apply grease to the sleeve of the input shaft bearing retainer, input shaft splines, and release lever contact surfaces. Install the release bearing and secure with retaining clips (5-speed models). Insert the fork from the top until the bearing and lever tabs lock in place. Slide the release lever cross shaft into the case, aligning the slot with the roll pin. Install the cross shaft plug and tighten to the torque (6-speed models). Reinstall the transaxle.