How to remove and install the latch and cable on Subaru Forester?

To uninstall the latch, one has to locate and then pry off the radiator grille, then mark a line around the latch for easy alignment, then finally undo the latch retaining bolts of the radiator support and finally removing the latch. Following this, raise the hood and reverse the direction of the hood release cable, prior to disconnecting it from the latch assembly. On the cable, it shall be detached from the latch assembly and out fitted with a stiff wire at the end and traced back to the firewall where it shall have all the cable retaining clips popped out. In the passenger compartment, the knee bolster must be detached and the hood release lever must be removed once the driver's side panel lower cover is popped-off while pulling the cable backward. Pull the stiff wire of the new cable through the hole and remove the old cable by disconnected it from the lever of the hood release and pulling it till the rear side of the passenger compartment. Take out the existing grommet boot from the cable opening of the firewall; guarantee that the new cable possesses a new grommet, and join the new cable with the wire. From the engine compartment side of the cable, extract the wire through the hole in the cable; then, from the passenger compartment side, force the grommet back into the hole in the firewall until it is properly seated.

Genuine Subaru Forester Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Latches found

View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310FC010
$49.00 MSRP: $71.02
You Save: $22.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood
- Position: Front
- Replaced by: 57310SA020
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998-2003 Subaru Forester | Base, L, S, X, XS | 2.5L H4, 2.5L H4 DOHC, 2.5L H4 DOHC (New EVAPO), 2.5L H4 SOHC
View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310SG010
$31.95 MSRP: $46.30
You Save: $14.35 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2014-2018 Subaru Forester | 2.0XT Premium, 2.0XT Touring, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Touring | 2.0L H4, 2.5L H4
View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310SJ030
$47.87 MSRP: $69.38
You Save: $21.51 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy F Hood Isl
- Position: Front
- Replaced by: 57310SJ032
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2019-2020 Subaru Forester | Base, Limited, Premium, Sport, Touring
View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310SA020
$49.00 MSRP: $71.02
You Save: $22.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy Hood Lh ; Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Replaces: 57310FC010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998-2005 Subaru Forester | Base, L, L.L.Bean, S, X, XS, XT | 2.5L H4, 2.5L H4 DOHC, 2.5L H4 DOHC (New EVAPO), 2.5L H4 SOHC, 2.5L H4 Turbo
View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310SC010
$35.12 MSRP: $50.90
You Save: $15.78 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood
- Position: Front
- Replaced by: 57310SC011
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2009-2012 Subaru Forester | X, X Limited, X Premium, XS, XT, XT Limited | 2.5L H4 DOHC, 2.5L H4 DOHC Turbo, 2.5L H4 SOHC
View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310SC011
$35.12 MSRP: $50.90
You Save: $15.78 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Replaces: 57310SC010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2009-2013 Subaru Forester | X, X Limited, X Premium, XS, XT, XT Limited | 2.5L H4 DOHC, 2.5L H4 DOHC Turbo, 2.5L H4 SOHC
View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310SA040
$42.52 MSRP: $61.62
You Save: $19.10 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Hood; Lock, Lock Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2006-2008 Subaru Forester | Forester Sports, L.L.Bean, X, XS, XT | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Forester Front Hood Lock Assembly
Part Number: 57310SJ031
$47.87 MSRP: $69.38
You Save: $21.51 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy F Hood Isl
- Position: Front
- Replaced by: 57310SJ032
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2019-2021 Subaru Forester | Base, Limited, Premium, Sport, Touring

Subaru Forester Hood Latch

Our website stands as the go-to online destination for OEM Subaru Forester Hood Latch. With complete lines of genuine Subaru Forester Hood Latch available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Forester Hood Latch Parts Questions & Experts Answers

Front Hood Lock Assembly
57310SA020
Q: How to remove and install the latch and cable on Subaru Forester?
A: To uninstall the latch, one has to locate and then pry off the radiator Grille, then mark a line around the latch for easy alignment, then finally undo the latch retaining bolts of the radiator support and finally removing the latch. Following this, raise the hood and reverse the direction of the hood release cable, prior to disconnecting it from the latch assembly. On the cable, it shall be detached from the latch assembly and out fitted with a stiff wire at the end and traced back to the firewall where it shall have all the cable retaining clips popped out. In the passenger compartment, the knee bolster must be detached and the hood release lever must be removed once the driver's side panel lower cover is popped-off while pulling the cable backward. Pull the stiff wire of the new cable through the hole and remove the old cable by disconnected it from the lever of the hood release and pulling it till the rear side of the passenger compartment. Take out the existing grommet boot from the cable opening of the firewall; guarantee that the new cable possesses a new grommet, and join the new cable with the wire. From the engine compartment side of the cable, extract the wire through the hole in the cable; then, from the passenger compartment side, force the grommet back into the hole in the firewall until it is properly seated.