Subaru 32005AA052 Switch Assembly Back Lamp

You can Select Your Vehicle to check if 32005AA052 fits your vehicle.

Raise the vehicle and support it securely on jackstands, the back-up light switch and Neutral Safety Switch are located on the left side of the transaxle, on turbo models, remove the inter cooler. To check either switch, trace the electrical lead back to its connector and hook up an ohmmeter. To check the back-up light switch, put the transaxle into reverse and verify that there's continuity (zero or low resistance), then put the transaxle in any other gear and verify that there's no continuity (higher infinite resistance). To check the Neutral Safety Switch, put the transaxle in Neutral and verify that there's continuity (zero or low resistance), then put the transaxle in any other gear and verify that there's no continuity (high or infinite resistance). If either switch fails to operate as described, replace it by unscrewing and removing the old switch, installing the new switch (make sure the washer is installed) and tightening it to the torque, then plugging in the electrical connector and verifying that the new switch works properly.

Put the transaxle into reverse and check for continuity (zero or low resistance) for the back-up light switch.

Put the transaxle into reverse and check for continuity (zero or low resistance) for the back-up light switch.

Replace it by unscrewing and removing the old switch, installing the new switch (make sure the washer is installed) and tightening it to the torque. Then plug in the electrical connector and verify that the new switch works properly.