How to replace extension housing oil seals and drive axle oil seals on Subaru Outback?

To replace the wheel seal, remove the driveshaft, pry out the old seal, and use a special tool. Install the new seal with a seal driver or large socket, lubricate the output shaft and driveshaft sleeve yoke, and then reinstall the driveshaft.

Genuine Subaru Outback Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Seals found

View related parts
Subaru Outback Front Axle Oil Seal, Inner
Part Number: 28015AA080
$9.72 MSRP: $14.08
You Save: $4.36 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal-Front Axle,Inner
- Position: Front,Inner
- Replaces: 28015AA021, 28015AA040
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-2004 Subaru Outback | Baja, Baja-B, Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, L, Limited, LS, L-S, LS-I, Out Back, Post, SUS, SUS Flat6, SUS Limited | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Outback Front Axle Oil Seal, Outer
Part Number: 28015AA070
$8.83 MSRP: $12.80
You Save: $3.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal-Front Axle,Outer
- Position: Front,Outer
- Replaced by: 28015AA0708A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-2004 Subaru Outback | Baja, Baja-B, Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, L, Limited, LS, L-S, LS-I, Out Back, Post, SUS, SUS Flat6, SUS Limited | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Outback Rear Axle Oil Seal
Part Number: 28015AA090
$9.34 MSRP: $13.53
You Save: $4.19 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal-Rear Axle
- Position: Rear
- Replaces: 28015AA001, 28015AA050
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-1999 Subaru Outback | Brighton, GT, L, LS, LS-I, Out Back, Post, SUS | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4
View related parts
Subaru Outback Rear Axle Oil Seal
Part Number: 28015AA110
$10.50 MSRP: $15.22
You Save: $4.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal-Rear Axle
- Position: Rear
- Replaced by: 28015AA1108A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-1999 Subaru Outback | Brighton, GT, L, LS, LS-I, Out Back, Post, SUS | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4
View related parts
Subaru Outback Rear Axle Oil Seal
Part Number: 28015AA100
$9.34 MSRP: $13.53
You Save: $4.19 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal-Rear Axle
- Position: Rear
- Replaced by: 28015AA1008A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-1999 Subaru Outback | Brighton, GT, L, LS, LS-I, Out Back, Post, SUS | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4

Subaru Outback Wheel Seal

Our website stands as the go-to online destination for OEM Subaru Outback Wheel Seal. With complete lines of genuine Subaru Outback Wheel Seal available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Outback Wheel Seal Parts Questions & Experts Answers

Rear Axle Oil Seal
28015AA110
Q: How to replace extension housing oil seals and drive axle oil seals on Subaru Outback?
A: To replace the wheel seal, remove the driveshaft, pry out the old seal, and use a special tool. Install the new seal with a seal driver or large socket, lubricate the output shaft and driveshaft sleeve yoke, and then reinstall the driveshaft.