How are valve clearances checked and adjusted on Subaru Legacy?

The Valve clearances are set while the engine is cold. First loosen and take off the air filter housing, resonator, battery, and battery tray. Then you remove the valve covers. For the models that are not turbocharged, you can take off the timing belt cover which you can locate at the left side cylinder head so as to see the timing mark situated on the left side of the sprocket in valve adjustment. With the help of the timing mark on the camshaft sprocket, align no.1 piston to be at TDC and using feeler gauge of the specific thickness to measure the clearance of both, the intake as well as the exhaust valve of no.1 cylinder. If the clearance is not correct, reduce it by unscrewing the lock nut and then rotating the fine adjuster until slight friction is felt when a feeler gauge is placed on the spur gear. After that release the pressure applied against the adjusting screw and keep it in its place with the help of a screw driver and then tight the lock nut for the second time and again measure the clearance. Continue to examine the valves in the other cylinders starting with the cylinder 3 then cylinder 2 then cylinder 4, each cylinder is brought to TDC by rotating the crankshaft by 1800 degrees clockwise. Check TDC in a way that the arrow on the camshaft sprocket is aligned so that in each of the adjusting positions, the valves are closed. Carry out the adjustment till all the valves are set to the required standard. Place back the valve covers with new gasket, then put back the spark plugs leads and various hoses and vac lines. Start the engine and look at the engine around for oil dripping between the valve covers and cylinder heads. Loosen the timing belt cover bolt on the right side camshaft assembly that will expose the timing belt sprocket; rotate the crankshaft pulley clockwise until the arrow mark on the camshaft sprocket reaches the position of 2:30as in the spec'ed position: the number 1 intake valve and the number 3 exhaust valve clearance should be checked. It is important that any measurements that have been identified to be off the adjusted specification be noted for a later use when calculating the required replacement lifters. Continue rotating the crankshaft to the 4:30, 7:30, and 10:30 locations for number 2 exhaust with I NI, number 2 intake with I NE, and number 1 exhaust with I NE respectively. If, after setting all the valve clearances you find that any valve is out of specification, set the lifters of the valves by removing one or more camshaft(s) from the cylinder head(s). Take actual measurements of the thickness of the subject lifter with the help of a micrometer, and then, ascertain the proper thickness of a new lifter by applying the mentioned formulas. Choose or try to find a lifter that has a thickness as close to the calculated thickness as possible, talk to the dealer or any automotive parts store with qualified personnel. Take off the camshafts on the out of adjustment valves and perform the same on all the valves until all of them can be described in the above manner. After that, secure the spark plugs, and the valve cover, and then reconnect the spark plug wires and put the boots on.

Genuine Subaru Legacy Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Intake Valves found

View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA371
$14.42 MSRP: $20.90
You Save: $6.48 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2012 Subaru Legacy | 2.5GT Limited, 2.5GT Premium, Baja-B, GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA362
$15.84 MSRP: $22.95
You Save: $7.11 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201AA361
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1999-2012 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, Baja, Baja-S, Base, Brighton, Cold Weather, GT, L, L-S, Limited, Post, SUS Limited | 2.2L H4 Series, 2.5L H4, 2.5L H4 SOHC
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA361
$15.84 MSRP: $22.95
You Save: $7.11 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201AA362
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1999-2005 Subaru Legacy | 2.5i, 2.5i Limited, Baja, Baja-S, Base, Brighton, Cold Weather, GT, L, Limited, L-S, Post, SUS Limited | 2.2L H4 Series, 2.5L H4
View related parts
Subaru Legacy PT040299 Valve Intake
Part Number: 13201AA082
$9.14 MSRP: $13.25
You Save: $4.11 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201AA080, 13201AA081
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1998 Subaru Legacy | Base, Brighton, L, LS, LS-D, Out Back, Post | 2.2L H4, 2.2L H4 (New EVAPO)
View related parts
Subaru Legacy PT040299 Valve Intake
Part Number: 13201AA340
$12.47 MSRP: $18.07
You Save: $5.60 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201AA310
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1997-1999 Subaru Legacy | GT, LS-I, Out Back, SUS | 2.5L H4
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA550
$14.02 MSRP: $20.32
You Save: $6.30 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2019 Subaru Legacy | 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 3.6L H6
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA522
$18.61 MSRP: $26.97
You Save: $8.36 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201AA521, 13201AA520
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Legacy | 3.0R, 3.0R LL-Bean, 3.0R Limited | 3.0L H6
View related parts
Subaru Legacy PT040299 Valve Intake
Part Number: 13201AA252
$13.58 MSRP: $19.68
You Save: $6.10 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996 Subaru Legacy | GT, LS-I, Out Back | 2.5L H4
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA400
$62.66 MSRP: $90.82
You Save: $28.16 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2005 Subaru Legacy | Baja-B, GT, GT Limited | 2.5L H4 Turbo
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA740
$14.42 MSRP: $20.90
You Save: $6.48 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring | 2.4L H4 DIT
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA61A
$4.63 MSRP: $6.72
You Save: $2.09 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2013-2014 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4 DOHC
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA310
$12.47 MSRP: $18.07
You Save: $5.60 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201AA340
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1997 Subaru Legacy | GT, LS-I, Out Back, SUS | 2.5L H4
View related parts
Subaru Legacy Valve-Intake
Part Number: 13201AA493
$15.53 MSRP: $22.50
You Save: $6.97 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2001-2004 Subaru Legacy | Flat6, Flat6 L.L.Bean, Flat6-S, SUS Flat6 | 3.0L H6
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA520
$18.61 MSRP: $26.97
You Save: $8.36 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201AA522
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005 Subaru Legacy | 3.0R, 3.0R Limited, 3.0R LL-Bean | 3.0L H6
View related parts
Subaru Legacy Valve-Intake
Part Number: 13201AA521
$18.61 MSRP: $26.97
You Save: $8.36 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13201AA522
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2008 Subaru Legacy | 3.0R, 3.0R Limited, 3.0R LL-Bean | 3.0L H6
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA070
$8.61 MSRP: $12.48
You Save: $3.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201AA072
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1991 Subaru Legacy | Turbo
View related parts
Subaru Legacy Valve Intake
Part Number: 13201AA071
$8.61 MSRP: $12.48
You Save: $3.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201AA072
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1991-1992 Subaru Legacy | Turbo
View related parts
Subaru Legacy PT040299 Valve Intake
Part Number: 13201AA072
$8.61 MSRP: $12.48
You Save: $3.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake; Intake Valve
- Replaces: 13201AA070, 13201AA071
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1991-1994 Subaru Legacy | Turbo
View related parts
Subaru Legacy PT040299 Valve Intake
Part Number: 13201AA080
$9.14 MSRP: $13.25
You Save: $4.11 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201AA082
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1991 Subaru Legacy | Base, L, LS, LS-D
View related parts
Subaru Legacy PT040299 Valve Intake
Part Number: 13201AA081
$9.14 MSRP: $13.25
You Save: $4.11 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 13201AA082
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1991-1992 Subaru Legacy | L, LS

| Page 1 of 2 |Next >

1-20 of 21 Results

Subaru Legacy Intake Valve

Our website stands as the go-to online destination for OEM Subaru Legacy Intake Valve. With complete lines of genuine Subaru Legacy Intake Valve available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy Intake Valve Parts Questions & Experts Answers

Valve Intake
13201AA362
Q: How are valve clearances checked and adjusted on Subaru Legacy?
A: The Valve clearances are set while the engine is cold. First loosen and take off the air filter housing, resonator, battery, and battery tray. Then you remove the valve covers. For the models that are not turbocharged, you can take off the timing belt cover which you can locate at the left side Cylinder Head so as to see the timing mark situated on the left side of the sprocket in valve adjustment. With the help of the timing mark on the Camshaft sprocket, align no.1 piston to be at TDC and using feeler gauge of the specific thickness to measure the clearance of both, the intake as well as the exhaust valve of no.1 cylinder. If the clearance is not correct, reduce it by unscrewing the lock nut and then rotating the fine adjuster until slight friction is felt when a feeler gauge is placed on the spur gear. After that release the pressure applied against the adjusting screw and keep it in its place with the help of a screw driver and then tight the lock nut for the second time and again measure the clearance. Continue to examine the valves in the other cylinders starting with the cylinder 3 then cylinder 2 then cylinder 4, each cylinder is brought to TDC by rotating the crankshaft by 1800 degrees clockwise. Check TDC in a way that the arrow on the camshaft sprocket is aligned so that in each of the adjusting positions, the valves are closed. Carry out the adjustment till all the valves are set to the required standard. Place back the valve covers with new gasket, then put back the spark plugs leads and various hoses and vac lines. Start the engine and look at the engine around for oil dripping between the valve covers and cylinder heads. Loosen the timing belt cover bolt on the right side camshaft assembly that will expose the timing belt sprocket; rotate the crankshaft pulley clockwise until the arrow mark on the camshaft sprocket reaches the position of 2:30as in the spec'ed position: the number 1 intake valve and the number 3 exhaust valve clearance should be checked. It is important that any measurements that have been identified to be off the adjusted specification be noted for a later use when calculating the required replacement lifters. Continue rotating the crankshaft to the 4:30, 7:30, and 10:30 locations for number 2 exhaust with I NI, number 2 intake with I NE, and number 1 exhaust with I NE respectively. If, after setting all the valve clearances you find that any valve is out of specification, set the lifters of the valves by removing one or more camshaft(s) from the cylinder head(s). Take actual measurements of the thickness of the subject lifter with the help of a micrometer, and then, ascertain the proper thickness of a new lifter by applying the mentioned formulas. Choose or try to find a lifter that has a thickness as close to the calculated thickness as possible, talk to the dealer or any automotive parts store with qualified personnel. Take off the camshafts on the out of adjustment valves and perform the same on all the valves until all of them can be described in the above manner. After that, secure the spark plugs, and the valve cover, and then reconnect the spark plug wires and put the boots on.