How do you remove and install a hood, and what adjustments are necessary for proper alignment on Subaru Legacy?

The hood Is rather massive and removing/fitting it Is rather delicate, thus, the process should be accomplished by at least two persons. First, drop blankets or pads over the cowl area of the body and fenders as the hood is removed to avoid any scrathes on the paint. Retrace an outline around the lip of the hood hinge for accurate installation and remove any wires that would get in the way of its removal. With help, support the hood and unscrew the bolts that connects the hinge to the hood, and after that, lift the hood. To install, do the following in the opposite manner you performed the removal steps. To make alterations on the hood, one has to shift the hinge plate slot with the help of loosening bolts and nuts for lateral and longitudinal changes. Draw a line around the hinge plate to know the desired movement, next, slacken the bolts or nuts, adjust the hood to the correct orientation, and then ensure the position is correct by tightening the hinge bolts. Also tighten the hood striker as required where it closes and sits tightly with the fenders having put a round the striker mounting flange, loosening the bolts slightly and moving it as a marker for the required position. Finally, lo-torque the striker mounting bolts, and if required align the hood bumpers so that the hood could lie flat on the fenders when closed. This is the area where the hood latch assembly and hinges are located; make sure to greese these areas with lithuim base grease from time to time to ensure the parts do not stick due to rust and thus lead to binding and wear.

Genuine Subaru Legacy Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Hoods found

View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AJ00A9P
$323.34 MSRP: $456.70
You Save: $133.36 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front Na; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring, 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 2.5L H4 DOHC, 2.5L H4 SOHC, 3.6L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AL00C9P
$373.88 MSRP: $533.50
You Save: $159.62 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front
- Position: Front
- Replaces: 57229AL00B9P, 57229AL00A9P
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring, 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 2.5L H4, 3.6L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AL00B9P
$373.88 MSRP: $533.50
You Save: $159.62 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete-Front; Hood
- Position: Front
- Replaced by: 57229AL00C9P
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring, 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 2.5L H4, 3.6L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AG04A9P
$369.85 MSRP: $527.75
You Save: $157.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front B; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Legacy | GT, GT Limited | 2.5L H4 Turbo
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AG06A9P
$369.85 MSRP: $527.75
You Save: $157.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front Na; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2009 Subaru Legacy | 2.5i, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, Base | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AE01A
$369.85 MSRP: $527.75
You Save: $157.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete-Front; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004 Subaru Legacy | Baja-B | 2.5L H4 Turbo
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AC020
$344.90 MSRP: $487.15
You Save: $142.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete-Front
- Position: Front
- Replaced by: 57220AC080
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1996 Subaru Legacy | Base, Brighton, GT, L, LS, LS-I, Out Back, Post | 2.2L H4 , 2.2L H4 (New EVAPO), 2.5L H4
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AN00A9P
$480.78 MSRP: $686.05
You Save: $205.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Compl F
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.4L H4 DIT, 2.5L H4 DI
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AG07A9P
$369.85 MSRP: $527.75
You Save: $157.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front Tb; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2009 Subaru Legacy | GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AJ01B9P
$323.34 MSRP: $456.70
You Save: $133.36 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front B; Hood
- Position: Front
- Replaces: 57229AJ01A9P
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2012 Subaru Legacy | 2.5GT Limited, 2.5GT Premium | 2.5L H4 Turbo
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AG03A9P
$369.85 MSRP: $527.75
You Save: $157.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front Na; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AJ01A9P
$323.34 MSRP: $456.70
You Save: $133.36 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front B; Hood
- Position: Front
- Replaced by: 57229AJ01B9P
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010 Subaru Legacy | 2.5GT Limited, 2.5GT Premium | 2.5L H4 Turbo
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57229AG05A9P
$369.85 MSRP: $527.75
You Save: $157.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete Front Obk; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2007 Subaru Legacy | 2.5i, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AC080
$344.90 MSRP: $487.15
You Save: $142.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Complete-Front; Hood
- Position: Front
- Replaces: 57220AC020
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1999 Subaru Legacy | Base, Brighton, GT, L, LS, LS-I, Out Back, Post | 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AC090
Product Specifications
- Other Name: Hood Complete-Front; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1997-1999 Subaru Legacy | GT, Out Back, SUS | 2.5L H4
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AA040
Product Specifications
- Other Name: Hood Complete-Front
- Position: Front
- Replaced by: 57220AA052
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990 Subaru Legacy | Base, L, LS, LS-D
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AE00A
Product Specifications
- Other Name: Hood Complete-Front
- Position: Front
- Replaced by: 57220AE00B
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2001 Subaru Legacy | Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, GT, L, Limited, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AE00B
Product Specifications
- Other Name: Hood Complete-Front; Hood
- Position: Front
- Replaces: 57220AE00A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Legacy | Baja, Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, L, L-S, Limited, SUS Flat6, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AA010
Product Specifications
- Other Name: Hood Complete-Front
- Position: Front
- Replaced by: 57220AA052
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1991 Subaru Legacy | Base, L, LS, LS-D
View related parts
Subaru Legacy Front Hood Panel
Part Number: 57220AA030
Product Specifications
- Other Name: Hood Complete-Front; Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1991 Subaru Legacy | Turbo

| Page 1 of 2 |Next >

1-20 of 22 Results

Subaru Legacy Hood

Our website stands as the go-to online destination for OEM Subaru Legacy Hood. With complete lines of genuine Subaru Legacy Hood available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy Hood Parts Questions & Experts Answers

Front Hood Panel
57220AE01A
Q: How do you remove and install a hood, and what adjustments are necessary for proper alignment on Subaru Legacy?
A: The hood Is rather massive and removing/fitting it Is rather delicate, thus, the process should be accomplished by at least two persons. First, drop blankets or pads over the cowl area of the body and fenders as the hood is removed to avoid any scrathes on the paint. Retrace an outline around the lip of the hood hinge for accurate installation and remove any wires that would get in the way of its removal. With help, support the hood and unscrew the bolts that connects the hinge to the hood, and after that, lift the hood. To install, do the following in the opposite manner you performed the removal steps. To make alterations on the hood, one has to shift the hinge plate slot with the help of loosening bolts and nuts for lateral and longitudinal changes. Draw a line around the hinge plate to know the desired movement, next, slacken the bolts or nuts, adjust the hood to the correct orientation, and then ensure the position is correct by tightening the hinge bolts. Also tighten the hood striker as required where it closes and sits tightly with the fenders having put a round the striker mounting flange, loosening the bolts slightly and moving it as a marker for the required position. Finally, lo-torque the striker mounting bolts, and if required align the hood bumpers so that the hood could lie flat on the fenders when closed. This is the area where the Hood Latch assembly and hinges are located; make sure to greese these areas with lithuim base grease from time to time to ensure the parts do not stick due to rust and thus lead to binding and wear.