Contact Us Live Chat or 1-888-503-5191
My Garage
My Account
Cart

Genuine Subaru Forester Accelerator Cable

Choke Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Accelerator Cables found

  • Subaru Forester Accelerator Cable - 37114FA120
    Diagram for Subaru Forester Accelerator Cable - 37114FA120
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Accelerator; Throttle Cable
    • Replaces: 37114AC030
    • Warranty: This genuine part is guaranteed by Subaru's factory warranty.
    Fits the following Vehicles:
    • 1998 Subaru Forester | Base, L, S | 2.5L H4 DOHC, 2.5L H4 DOHC (New EVAPO)
  • Subaru Forester Accelerator Cable - 37114FA110
    Diagram for Subaru Forester Accelerator Cable - 37114FA110
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Accelerator; Throttle Cable
    • Warranty: This genuine part is guaranteed by Subaru's factory warranty.
    Fits the following Vehicles:
    • 1999-2002 Subaru Forester | Base, L, S | 2.5L H4 SOHC
  • Subaru Forester Accelerator Cable - 37114SA030
    Diagram for Subaru Forester Accelerator Cable - 37114SA030
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Accelerator; Throttle Cable
    • Warranty: This genuine part is guaranteed by Subaru's factory warranty.
    Fits the following Vehicles:
    • 2003-2004 Subaru Forester | X, XS | 2.5L H4

Subaru Forester Accelerator Cable

Our website stands as the go-to online destination for OEM Subaru Forester Accelerator Cable. With complete lines of genuine Subaru Forester Accelerator Cable available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Forester Accelerator Cable Parts Questions & Experts Answers

  • Q: How Do I Replace and Adjust an Accelerator Cable on Subaru Forester?
    A: To replace the accelerator cable, loosen the locknut and disengage the cable from the cable bracket, disconnect the cable from the throttle lever cam, trace the cable back to the firewall and detach any cable clips or guides, working inside the vehicle, up under the dash, disengage the other end of the cable from the accelerator pedal, pry out the grommet in the firewall, then remove the cable through the firewall from the engine compartment side. Installation is the reverse of removal, making sure the cable is routed correctly, and if necessary, applying sealant around the accelerator cable to prevent water from entering the passenger compartment. To adjust the accelerator cable, turn the adjusting nut to produce just enough cable slack so that the throttle plate is fully closed when the accelerator pedal is released, and have an assistant help you verify that the throttle plate opens all the way when you depress the accelerator pedal to the floor and that it returns to the idle position when you release the accelerator. Verify the cable operates smoothly and it must not bind or stick.