×
- Live Chat
- 1-888-503-5191
My Garage
My Account
Cart
Genuine Subaru Forester Wheel Cylinder
Brake Wheel Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Wheel Cylinders found
Subaru Forester Wheel Cylinder Rear Brake
Part Number: 26256AA011$46.14 MSRP: $64.08You Save: $17.94 (28%)Ships in 1-3 Business Days
Subaru Forester Wheel Cylinder Rear Brake
Part Number: 26256AA012$46.14 MSRP: $64.08You Save: $17.94 (28%)Ships in 1-3 Business Days
Subaru Forester Wheel Cylinder Assembly
Part Number: 26256AA010$46.14 MSRP: $64.08You Save: $17.94 (28%)Ships in 1-3 Business Days
Subaru Forester Wheel Cylinder
Our website stands as the go-to online destination for OEM Subaru Forester Wheel Cylinder. With complete lines of genuine Subaru Forester Wheel Cylinder available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.
Subaru Forester Wheel Cylinder Parts Questions & Experts Answers
- Q: How to replace wheel cylinders in a Subaru Forester?A: If replacement is indicated, usually because of fluid leakage or sticky operation, it is recommended that the wheel cylinders be replaced, not overhauled. Always replace the wheel cylinders in pairs - never replace just one of them. To remove, first remove the brake drum and brake shoes. Then, remove the Brake Line fitting from the rear of the wheel cylinder with a flare-nut wrench. Don't pull the metal line out of the wheel cylinder - it could bend, making installation difficult. Next, remove the two nuts securing the wheel cylinder to the brake backing plate. After that, remove the wheel cylinder and plug the end of the brake line to prevent the loss of brake fluid and the entry of dirt. For installation, place the wheel cylinder in position and, while it's still loose, connect the brake line to it, being careful not to cross-thread the fitting. Don't tighten the fitting yet. Install the bolts and tighten them. Tighten the line fitting securely. Finally, bleed the brakes. Don't drive the vehicle in traffic until the operation of the brakes has been thoroughly tested.
